Basic Info.
Model NO.
LFT-PTFE Filter Cartridge
Medium Material
Microfiber
Cartridge Filter
Non-Woven Polyester Fiber
Filter Bag Filter
The Filter Type
Usage
Liquid Filter, Air Filter, Particle Removing
Filtration Grade
Microfiltration
Filter Bag Sectional Shape
Pleated Filter
Filter Bag Environment
High-Temperature
Cartridge Installation
Microfiltration
Filter Media
Hydrophilic Nylon66
O-Rings/Gasket
Silicone/EPDM/Viton/Tev
Sealing Technology
Thermal Bonding, No Adhesives
Length(in)
5, 10, 20, 30, 40
Filtration Area
≥ 6.4 FT2/10 in (≥ 0.60 M2/250 mm)
Pore Size, Um
0.1, 0.22, 0.45, 0.65, 1.0, 3.0, 5.0
Integrity Test- Water Bubble Point at 23
2800mbar
Product Description
1.Company introductionHangzhou Anow Microfiltration Co., Ltd. is a well-known filtration company in Asia who focus on research and development of MCE, Nylon, PES, PVDF, PTFE membrane, with pore size ranging from 0.03 μm to 10 μm, as well as design and production of various pleated filter cartridges, syringe filters and capsule filters. ANOW provides professional assistances to liquid and gas & air filtration, separation and purification solutions for customers around the world in biopharmaceutical, medical, food & beverage, microelectronic, chemistry, water treatment and laboratory applications.
Replacing Sartorius PTFE Filter 0.22 Micron
Broad chemical compatibility
Absolute construction with retention ratings of 0.05, 0.1, 0.22, 0.45, 1.0, 3.0, 5.0 or 10 µm
High throughputs and superior flow rates
Long service life and cost-effective
100% integrity testable prior to release
2.Features
1. Low extractables and high adsorption
2. High throughputs and cost-effective
3. 100% integrity testable prior to release
Quality
Cartridges produced in a controlled environment
Manufactured according to ISO9001 certified Quality Management System
3. Application
Pharmaceutical Filter and Medical Filter
0.2 micron absolute water filter for Blood products, Buffers, BiologicalsAir sterile filter for bacterials filtration in Cell and tissue culture media and IntermediatesFilters for liquids and air filter in Vaccines , Ophthamics and SVP and LVP processing industryProtein solutions and Supernatants filtration
Chemical and Beverage
Widely used in the solvent ink filter of chemical industryPTFE air vent filter tank to keep air clean enough for the industry processing system1 Micron water filter In mineral water filter to keep quality and control bacterials limit, safety enough for the high quality water product
4. Specification
Materials of Construction |
Membrane | Polytetrafluoroethylene (PTFE) |
Support | PP |
Core, Cage and Drainage | PP |
End Caps | PP (222/226 with encapsulated stainless steel reinforcing ring) |
O-rings/Gasket | EPDM/TEV/Viton/Silicone |
Sealing Technology | Thermal Bonding, No Adhesives |
Dimensions |
Diameter | Φ68 |
Length | 5 inch, 10 inch, 20 inch, 30 inch, 40 inch |
Filtration Area, ft2 |
≥ 5.8 per 10-inch element |
Pore Size, μm |
0.05, 0.1, 0.22, 0.45, 1.0, 3.0, 5.0, 10 |
Maximum Differential Pressure |
Forward: 4.2 bar @ 23 ºC; 1.5 bar @ 85 ºC |
Flow Rate & Pressure Drop, per 10-inch cartridge |
0.1 μm | ≥ 6 L/min at 210 mbar |
0.22 μm | ≥ 10 L/min at 210 mbar |
0.45 μm | ≥ 17 L/min at 210 mbar |
Integrity Test-60/40% IPA/water bubble point at 23 ºC |
0.1 μm | ≥ 1000 mbar |
0.22 μm | ≥ 900 mbar |
0.45 μm | ≥ 300 mbar |
Bacterial Retention (for 0.05, 0.1 and 0.22 μm only) |
Passed the bacterial challenge testing using Brevundimonas diminuta(ATCC19146) at a minimum challenge concentration of 1 x 107 CFU/cm2. |
Extractables, per 10-inch cartridge |
≤ 50 mg after 24-h soak in water |
Effluent Particle Level |
Meets the requirements of Chinese Pharmacopoeia 2010, Volume 2 appendix 5 C. |
Non-Fiber Releasing |
Meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). |
Toxicity |
Component materials meet GB/T 14233.2<2005> of Chinese National Standard for Safety Tests. |
TOC |
< 500 ppb after a water flush of 60 liters per 10-inch cartridge |
Multiple Sterilization Cycles |
15 steam-in-place sterilization or autoclave cycles of 30 min at 123ºC |
Oxidizable Substances |
Meets the criteria of Chinese Pharmacopoeia 2010, volume 2 for purified water. |
Bacterial Endotoxins |
< 0.25 EU/ml as determined by the LAL test |
Good Manufacturing Practices |
Manufactured in an ANOW facility which adheres to Good Manufacturing Practices.2 |
5. Ordering Information
LP | S | 120 | C | 10 | S | S |
Code | Grade | Code | Membrane | Code | Rating (um) | Code | End Cap Configuration | Code | Length inch | Code | Seal | Code | Support |
LP | Pharmaceutical | S | PES | 010 | 0.1 | A | 222/Fin | 5 | 5 | S | Silicone | A | PP |
LF | Food&beverage | NN | Nylon | 022 | 0.22 | B | 222/Flat | 10 | 10 | E | EPDM | B | PP with stainless steel end cap |
LE | Microelectronic | M | MCE | 045 | 0.45 | C | 226/Fin | 20 | 20 | V | Viton |
| | T | PTFE | 065 | 0.65 | D | 226/Flat | 30 | 30 | T | TEV | C | PP with stainless steel lining |
| | V | PVDF | 080 | 0.8 | E | DOE | 40 | 40 | | |
| | P | PP | 120 | 1.2 | | | | | | | | |
| | | | 300 | 3 | | | | | | | | |
6. CertificateNSF
FDA
SGS
CE certifications
ISO13485:2003
ISO9001:20087. PackingFilter cartridge
Length | Dimension (cm) | Pcs/Carton | KGS |
10" | 48*39*20 | 12 | 6 |
20" | 65*42*27 | 15 | 11 |
30" | 89*42*27 | 15 | 17.5 |
40" | 114*42*27 | 15 | 20 |
8. FAQFAQ
1.OEM service available ?
Yes, OEM service is available, but the ANOW brand price better than OEM
2.Payment Term:
We can accept L/C, T/T, Western Union, MoneyGram, Paypal
3.Certicification:
We had passed ISO9001,SGS certified, at the same time, our company had approved by Alibaba 10rd Party Certification of Production and Trading Assessment
4.Shipping :
If your order is not big enough , Door to Door Service is the best choice via UPS,FEDEX,DHL,EMS.
For big quantity, by air or by sea through your forwarder is one Normal Way , we also can provide cost-effective forwarder for your reference.
5.Sample:
1) Samples are available for testing if any need!
2) Sample delivery date is within 1-2days, if have stocks; Customer design is about 3-7 days
6. Lead time:
The normal lead time for Replacing Sartorius PTFE Filter 0.22 Micron is 5-10days, which depends on your quantity.
9. Contact24 Hours service for you!
http://anow2008.en.made-in-china.com
ANOW Making the Filtration Better
Address:
3f, Building #1, No. 10, Xiyuan Third Rd. Xihu District, Hangzhou, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Chemicals, Electrical & Electronics, Health & Medicine, Industrial Equipment & Components, Manufacturing & Processing Machinery
Company Introduction:
Hangzhou Anow Microfiltration Co., Ltd. is a well-known filtration company in Asia who focus on N66, N6, MCE, PES, PVDF, PTFE membrane development, with pore size ranging from 0.03 μ M to 10 μ M, and design and production of various pleated filter cartridges and capsule filters. ANOW provides professional assistance to liquid and gas & air filtration, separation and purification solutions for customers around the word in biopharmaceutical, medical, food & beverage, microelectronic, chemistry, water treatment and laboratory applications.
Our massion is "make\ing the filtration better"